Contact
The clean solution

Kitchen planning in food service:

Why the pros are the best choice to help plan your dishwashing area, etc.

If you want a buzz out front, you'll need everything to run fluidly in the back, in the kitchen and dishwashing area. This is a foundational truth followed by every top restaurateur in the world. For that reason, it is vital to consult industry experts at the planning and installation stages who can factor in kitchen processes to ensure good levels of efficiency and profit. In commercial kitchens it is all about keeping distances short, applying ergonomics, designing sensible workflows and maintaining hygiene. If you find out later, when all appliances are already installed on your premises, that mistakes were made during the planning phase, you will find it expensive to go back and repair the damage. 

 

Professional kitchen planning

When experienced specialists plan a kitchen for a restaurant, café, bar or catering company, they first determine what space is needed: where will deliveries come to? And where will they be stored? Meat, fish, vegetables etc. have to be accommodated differently from drinks and dry food. What space will the cooking and dishwashing areas occupy? And, of course, storage rooms must be planned from the outset, keeping them separate from the actual kitchen, the staff areas, the office and, above all, the dishwashing area.

Efficiency in the dishwashing area

Workspaces in your restaurant, canteen or bistro should be divided in such a way as to facilitate efficient work processes, avoiding long or overlapping routes for staff. Of course, this must also include a strict separation of ‘clean’ and ‘unclean’ zones for hygiene reasons. It is equally important that, for example, kitchen staff quickly dispatch food to the serving staff and dirty pots return equally quickly to the dishwashing area – but without these zones overlapping.

 

It is interesting to note, however, that the majority of problems in commercial kitchens do not start at the cooker since, generally, several cooking areas are available, meaning the risk of everything failing is minimal. The dishwashing area, though, can often be a critical point. Sometimes plates, glasses and cutlery don't come out properly clean, sometimes the dishwashing machine simply stops working and sometimes it doesn't mesh properly in the system with the staff. Food-service businesses also suffer a disproportionately high incidence of absence, for which there are several reasons. One such reason might be the significant physical and mental strain of peak times, another that ergonomics was not properly considered when buying kitchen and dishwashing appliances.

 

The result is that employees call in sick at short notice, processes get mixed up and guests are unhappy because quality suffers.

Cleanliness and hygiene are your trump cards

In order to avoid disruptions to smooth-running processes, hotel managers, chefs and restaurant managers opt for professional suppliers right from the planning phase. Experienced restaurateurs know that the dishwashing area in particular can cause pain in any restaurant. In food service and hotels, you need to reliably ensure that washware will be hygienically clean and available quickly. That is why many restaurant and hotel managers choose warewashing technology specialists like MEIKO for their commercial kitchens, right from the planning stage.

13 points to remember when planning your commercial kitchen:

  1.  Are your kitchen planners sufficiently experienced?
  2.  Can you plan the set-up so that individual areas can work closely together while remaining separate?
  3.  Have you managed to comply with hygiene requirements?
  4.  Are staff routes efficient while they are working?
  5.  What volume is to go through the dishwashing machine on a daily basis?
  6.  Do you have particular requirements for your washware? E.g. in terms of care
  7.  How much time do you have available for each wash cycle? (Think about reserves of crockery/kitchenware)
  8.  How are water, electricity and detergent managed? Are you protecting the company's bottom line?
  9.  Can you wash large quantities of washware – including tall glasses – in a single work step?
  10.  Will your commercial dishwashing machine keep the workspace largely free of steam so as not to pollute the indoor environment with mould growth?
  11.  Is it easy and ergonomic to operate, safeguarding the health of your employees to avoid sick days?
  12.  Does your kitchen equipment live up to the aesthetic standards of modern, professional kitchen equipment?
  13.  Is the customer service team already on board with help and advice in the planning stage? And are you confident you will be able to reliably reach them in future?

Utilise professionals' expertise

Making sure you plan for all of these points in your commercial kitchen is difficult to do by instinct. It is better to get a specialist in. Experienced kitchen planners know how to make optimum use of the available space, for example, to facilitate efficient processes and they know what appliances are really necessary for your individual circumstances. They also know how to account for important aspects like ergonomics in the workplace and, if necessary, provide information on the strict hygiene regulations for commercial kitchens (more information on this in the article: What is HACCP? And why does every restaurateur need it?)

M-iClean H: innovative technology and modern design

Expertise in planning, highly effective technology for dishwashing machines and modern design: the warewashing technology specialists at MEIKO have it all. In particular, hood type dishwashing machine the M-iClean H is a great example of how to practically implement ideas in planning, hygiene, ergonomics and efficiency with no problems. It features innovative waste water heat recovery and heat retention systems which can reduce energy use by up to 21 %. Not to mention that the M-iClean H can also guarantee that washware complies with the strict hygiene guidelines for commercial dishwashing after every cycle. On top of that, washware is inserted higher up and the opening is especially large. The hood opens when you press a button. All of this keeps physical strain to a minimum for staff, contributing to greater efficiency in the workplace, a higher level of employee satisfaction and reduces the number of staff absences.

Punkt2 AirConcept M-iQ
Heat recovery to enhance air qualitiy and energy efficiency

Heat recovery to enhance air qualitiy and energy efficiency

Do you need help planning a new kitchen or dishwashing area for your restaurant, café, hotel or canteen?
Specialist advisers at MEIKO will be happy to talk to you and assist.